Trilogy 100

Specifications

Environmental
Temperature 5°C – 40°C
Relative humidity 15% – 95%
Atmospheric pressure 110 kPa to 60 kPa
Physical
Weight 11 lbs, 5 kgs
Size 6.6″L x 11.2″W x 9.3″H (16.68 cm L x 28.45 cm W x 23.52 cm H)
Controls
Circuit types Active with PAP, passive
Ventilation types Volume control, pressure control, bilevel
Volume modes AC, SIMV (w/PS), CV
Pressure modes CPAP, S, S/T, T, PC-SIMV (w/PS)
IPAP 4 – 50 cm H20
EPAP 0 – 25 cm H20 for active circuits
4 – 25 cm H20 for passive circuits
CPAP 4 – 20 cm H20 for passive circuits
PEEP 0 – 25 cm H20 for active circuits
4 – 25 cm H20 for passive circuits
Pressure support differential 0 – 30 cm H20
Measured patient parameters
Tidal volume 50 – 2000 ml
Breath rate 0 – 60 for AC mode
1 – 60 for all other modes
Inspiratory time 0.3 – 5.0 secs
Rise time 1 – 6
Ramp start pressure 0 – 25 cm H20 for active circuits
4 – 25 cm H20 for passive circuits
4 – 19 cm H20 in CPAP mode
Ramp length Off, 5 – 45 minutes
Flex Off, 1 – 3
Flow trigger sensitivity 1 – 9 l/min
Flow cycle 10% – 90%
Apnea rate 4 – 60 BPM
Tidal volume 0 – 2000 ml
Minute ventilation 0 – 99 l/min
Leak rate 0 – 200 l/min
Respiratory rate 0 – 80 BPM
Peak inspiratory flow 0 – 200 l/min
Peak inspiratory pressure 0 – 99 cm H20
Mean airway pressure 0 – 99 cm H20
Percentage patient triggered breaths 0 – 100%
I:E ratio 9.9:1 to 1:9.9
Alarms
Circuit disconnect Off, 10 – 60 secs
Apnea Off, 10 – 60 secs
High tidal volume Off, 50 – 2000 ml
Low tidal volume Off, 50 – 2000 ml
High minute ventilation Off, .1 – 99 l/min
Low minute ventilation Off, .1 – 99 l/min
High respiratory rate Off, 4 – 80 BPM
Low respiratory rate Off, 4 – 80 BPM

 

Contact Customer Service @ 800-755-3800